Levoit Humidifier LUH-D302-BUK Manual

The Levoit LUH-D302-BUK is a 2.5L ultrasonic cool mist humidifier designed for medium to large rooms. It features a 360° nozzle, adjustable mist output, optional night light, auto shut-off when water runs low, and a quiet operation mode. It helps alleviate dry air symptoms and is easy to clean and maintain. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 2.5L water tank, ultrasonic mist generator, 360° adjustable nozzle, control panel, night light, water level window, and power adapter.

FeatureDescription
2.5L Water TankLarge capacity for up to 25 hours of operation
Ultrasonic TechnologyQuiet operation producing fine cool mist
360° NozzleAdjustable direction for optimal mist distribution
Adjustable Mist OutputThree levels (Low, Medium, High) to control humidity
Optional Night LightSoft lighting that can be turned on/off
Auto Shut-OffTurns off automatically when water level is low
Quiet Operation ModeUltra-quiet for undisturbed sleep
Easy to CleanWide opening and removable parts for simple cleaning
Water Level WindowAllows easy monitoring of remaining water
Power AdapterDC power input for safe operation

Installation & Setup

Unpack and inspect all contents. Place on a flat, stable, and water-resistant surface.

  1. Remove all packaging materials from the humidifier and accessories.
  2. Place the humidifier on a level surface at least 12 inches away from walls and electronic devices.
  3. Fill the water tank with clean, cool tap water. Do not exceed the MAX fill line.
  4. Securely attach the water tank to the base unit, ensuring it is properly seated.
  5. Plug the power adapter into the DC input on the humidifier, then plug into a standard 120V AC outlet.

WARNING! Only use the provided power adapter. Do not place on carpets or uneven surfaces where it may tip over.

First-Time Use

Power on the humidifier; follow these steps for initial operation.

  1. Ensure the humidifier is properly assembled and placed on a level surface.
  2. Press the POWER button to turn on the unit. The default mist level is Medium.
  3. Adjust the mist output using the MIST button to select Low, Medium, or High.
  4. Rotate the 360° nozzle to direct mist away from walls and furniture.
  5. Press the NIGHT LIGHT button to turn the soft blue light on or off as desired.
  6. For continuous operation, ensure the water tank is filled before use.

CAUTION! Use only clean, cool water. Do not add essential oils, fragrances, or other additives directly into the water tank, as this may damage the unit.

Specifications

Controls and Settings

Control Panel: POWER button, MIST button (cycles through Low, Medium, High), NIGHT LIGHT button.

Indicator Lights: Power On (Blue), Mist Level (LED indicators for Low/Med/High), Night Light (Blue when on).

Operation: Press POWER to turn on/off. Press MIST to adjust output level. Press NIGHT LIGHT to toggle the soft blue light. The humidifier will automatically shut off when the water tank is empty, indicated by the power light blinking.

Operation Modes

Three mist output levels and an optional night light.

  1. Low Mist: For maintaining slight humidity or quiet nighttime use (100 mL/h).
  2. Medium Mist: Balanced output for general daily use (150 mL/h).
  3. High Mist: Maximum output for quickly raising humidity in dry conditions (200 mL/h).
  4. Night Light: Provides soft, ambient lighting. Can be turned off for complete darkness.
  5. Auto Shut-Off: Activates when water level is low to protect the ultrasonic module.

Tip: Use the Low setting in bedrooms for quiet operation and to avoid over-humidification.

Maintenance & Cleaning

Regular cleaning is essential to prevent mold and mineral buildup.

  1. Daily: Empty and rinse the water tank if not in continuous use.
  2. Weekly: Disassemble and clean all parts with a soft brush and mild detergent. Rinse thoroughly.
  3. Descaling: For hard water areas, use a mixture of white vinegar and water (1:1) to soak the tank and base for 20 minutes. Scrub gently and rinse multiple times.
  4. Drying: Allow all parts to air dry completely before reassembly or storage.
  5. Filter: This model does not use a filter. Regular cleaning of the water tank and ultrasonic disk is sufficient.

WARNING! Unplug the unit before cleaning. Never submerge the base unit in water. Do not use abrasive cleaners or brushes.

Safety Features

Auto Shut-Off: Prevents dry running when the water tank is empty. Tip-Over Protection: The unit will stop misting if tipped over. Overcurrent Protection: Built-in circuit protection in the power adapter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ETL Listed: Certified to meet North American safety standards. Copyright © Levoit. For support, visit www.levoit.com or contact 1-888-726-8520.

Troubleshooting

SymptomPossible CauseCorrective Action
No mist outputEmpty water tank / Incorrect assemblyFill tank with water. Ensure tank is properly seated on the base.
Low mist outputMineral buildup / Low mist settingClean the ultrasonic disk and tank. Increase mist level to Medium or High.
Water leakageTank not sealed / OverfilledCheck tank seal and cap. Do not fill above MAX line.
Unit not powering onNo power / Adapter issueCheck outlet and ensure power adapter is firmly connected. Try a different outlet.
Unusual noiseVibration / Debris in waterPlace on a level surface. Use clean, filtered water.
Night light not workingLED issue / Button not pressedPress NIGHT LIGHT button. If still not working, contact support.

Reset: Unplug the unit for 2 minutes, then plug back in.

Service: 1-888-726-8520; [email protected]; www.levoit.com

Levoit Humidifier LUH-D302-BUK Manual © - All Rights Reserved 2025