Levoit Humidifier Dual 150 LUH-D302-WEU Manual

The Levoit Humidifier Dual 150 (Model LUH-D302-WEU) is a cool mist humidifier designed for medium to large rooms up to 40m². It features a 4.5L water tank, dual 150mL/h mist output, 360° nozzle, optional night light, three mist levels, auto mode, timer (1-12 hours), and a built-in humidity sensor. It operates quietly (<35dB) and includes essential safety features like low water protection and automatic shut-off. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 4.5L Transparent Water Tank, 360° Rotating Nozzle, Control Panel, Built-in Handle, Air Inlet, Water Tank Cap, Base Unit, Power Adapter.

Installation & Setup

Unpack and inspect all contents. Place on a stable, level, and dry surface away from direct sunlight and heat sources.

1. Prepare the humidifier: Remove all packaging materials from the base and tank.
2. Fill the water tank: Remove the tank cap, fill with clean, cool tap water (max line indicated). Do not use hot water. Replace cap securely.
3. Assemble: Place the water tank onto the base unit, aligning properly. Ensure it sits firmly.
4. Power connection: Plug the DC power adapter into the humidifier's DC input port, then plug the adapter into a standard 220-240V AC wall outlet.

WARNING! Always use the provided power adapter. Ensure hands are dry when handling the unit or plug. Do not place on carpets or uneven surfaces.

First-Time Use

Power on the humidifier; the control panel will illuminate.

1. Power: Press the POWER button. The unit will beep and default to Manual Mode, Medium mist level.
2. Select Mode: Press the MODE button to cycle between Manual (fixed mist level) and Auto (maintains set humidity).
3. Adjust Mist Level: In Manual Mode, press the MIST button to cycle through Low, Medium, High output.
4. Set Target Humidity (Auto Mode): In Auto Mode, use the +/- buttons to set desired humidity level (40%-80% RH). The sensor will maintain it.
5. Set Timer: Press TIMER, then use +/- to set duration (1-12 hours). The unit will auto shut-off.
6. Night Light: Press the LIGHT button to turn on/off. Hold to adjust brightness.

CAUTION! Use only clean, cool water. Never add essential oils, fragrances, or chemicals directly into the water tank, as this may damage the unit and void warranty.

Specifications

• Model: LUH-D302-WEU
• Tank Capacity: 4.5L
• Max Mist Output: 300 mL/h (Dual 150)
• Room Coverage: Up to 40 m² / 430 sq ft
• Noise Level: ≤35 dB
• Power Consumption: 14W Max
• Input Power: 100-240V AC, 50/60Hz (Adapter: Output 24V DC, 0.6A)
• Operation Modes: Manual (3 levels), Auto with Humidity Sensor
• Timer: 1-12 hours
• Humidity Sensor Range: 40% - 80% RH
• Product Dimensions (LxWxH): Approx. 24 x 24 x 33 cm
• Weight (Empty): Approx. 1.8 kg

Controls and Settings

Access all functions via the touch control panel on the top of the unit.

Control Panel Buttons: POWER, MODE, MIST, TIMER, LIGHT, Humidity +/-.

Indicator Lights: Power, Mode (Manual/Auto), Mist Level (Low/Med/High), Timer, Night Light, Low Water Warning (Red).

Manual Mode: User selects fixed mist level (Low, Medium, High). Auto Mode: Unit uses built-in sensor to adjust mist output to maintain user-set humidity (40%-80%). Timer: Set 1-12 hours for automatic shut-off. Night Light: Soft white light with adjustable brightness or off.

Operation Modes

Choose the best mode for your comfort and efficiency.

1. Manual Mode: Press MODE until "Manual" icon lights. Press MIST to choose level.
   • Low: Quiet, for slight humidity or night use.
   • Medium: Balanced output for general use.
   • High: Maximum mist for quick humidity boost.
2. Auto Mode: Press MODE until "Auto" icon lights. Use +/- to set target humidity (40-80% RH). The unit will automatically turn on/off and adjust mist to maintain this level.
3. Timer Function: Press TIMER, then +/- to set hours (1-12). The timer icon will blink. The unit will beep and shut off when time elapses.
4. 360° Nozzle: Gently rotate the nozzle to direct mist away from walls, furniture, or electronics.

Tip: For energy savings and optimal comfort, use Auto Mode with a target humidity of 50-60%.

Maintenance & Cleaning

Regular cleaning is essential for performance, air quality, and longevity.

1. Daily: Refill with fresh, cool water. Do not let water sit for more than 2 days.
2. Weekly Cleaning:
   • Unplug the unit and remove the water tank.
   • Empty any remaining water from the tank and base.
   • Clean the tank interior with a soft brush or cloth under running water. Do not submerge the base.
   • Wipe the base's exterior with a damp cloth. Ensure the air inlet and outlet are clear of dust.
3. Monthly Deep Cleaning (Descaling):
   • Mix 240ml white vinegar with 240ml water in the tank.
   • Place tank on base and let solution sit in the base for 15-20 minutes.
   • Empty the solution, then rinse the tank and base thoroughly 2-3 times with clean water to remove vinegar residue.
4. Drying & Storage: Before storage or after cleaning, ensure all parts are completely dry. Store in a cool, dry place in original packaging if possible.

CAUTION! Never use abrasive cleaners, detergents, or chemicals. Never immerse the base unit, control panel, or power adapter in water. Unplug before any cleaning.

Safety Features

The humidifier includes multiple protections for safe operation.

• Automatic Shut-off (Low Water): When the water tank is empty or not properly seated, the unit will beep 3 times, the red low water indicator will light, and it will automatically power off.
• Overheat Protection: Internal sensor shuts off the unit if motor temperature is too high.
• Tip-Over Protection: If the unit is tipped over, it will automatically stop operation.
• Anti-microbial Material: The water tank is made from BPA-free, anti-microbial materials to inhibit mold and bacteria growth.

WARNING! This is an electrical appliance. Keep away from children. Do not operate if cord or plug is damaged. Do not cover the mist outlet or air inlet during operation.

Regulatory Information

This device complies with relevant EU directives including Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU. The CE mark indicates conformity. Copyright © Levoit. For support within the EU, visit www.levoit.com or contact your local retailer. Disposal: Dispose of the product according to local WEEE (Waste Electrical and Electronic Equipment) regulations. Do not dispose with household waste.

Troubleshooting

Reset: Unplug the unit for 2 minutes, then plug back in to reset the control system.

Service: For warranty or technical support, visit support.levoit.com or contact the retailer. Do not attempt to repair the unit yourself.